Monthly Archives: February 2011

I500 is up running

We just installed a new UPS. The I500 is back running now. Continue reading

Posted in Uncategorized | Comments Off on I500 is up running

What’s in BioPack?

BioPack consists of pulse sequences used mainly for proteins and nucleic acids. It is updated constantly. New sequences will be added whenever new version of VnmrJ is released.  As in VnmrJ version 2.3A, there are >360 sequences available.  If you … Continue reading

Posted in Uncategorized | Comments Off on What’s in BioPack?

I500 status

A new UPS was ordered for the I500. It’s down until we get and install the UPS, which should be next week. Continue reading

Posted in Uncategorized | Comments Off on I500 status

Email NMR data

You can email .fid data files from spectrometers or workstations within VnmrJ using the command “vnmremail(‘filename’,’email address’)”. For example “vnmremail(‘/home/doebrown/test.fid’,’doebrown@indiana.edu’). The files are compressed and archived into .tgz format (tar + gzip) so you’ll need an archiving utility program on … Continue reading

Posted in Uncategorized | Comments Off on Email NMR data

I500 is down

The UPS power supply for the I500 was failed during this weekend and is now being repaired. The I500 is unavailable until the UPS get fixed. Continue reading

Posted in Uncategorized | Comments Off on I500 is down

Using array to acquire a series of 2D NMR

As we know, array in VnmrJ can be used to optimize parameters for data collection and to acquire a series of dataset, which are not limited to 1D only. For example, for backbone dynamics measurement, 15N R1, R2, heteronuclear NOE, … Continue reading

Posted in Uncategorized | Leave a comment

Welcome

… to the new Indiana University NMR website and blog. Continue reading

Posted in Uncategorized | Comments Off on Welcome